333 W Julian St
333 W Julian St is a 5-story building in Downtown San Jose with 69% of its floor area within daylight reach of a facade. This screen estimates 93 homes and scores it 56 out of 100 for office-to-residential conversion suitability.
CA-18 · Screened 2026-10-20 · Worth a feasibility study
Where 333 W Julian St is
Its block in Downtown San Jose, drawn from San Jose's own building outlines and street centerlines.
- Already housing
- Not screened
- 333 W Julian St
This building does not pencil at default assumptions, even with a modeled RESIDE Act grant.
Every floor carries 9,980 sq ft of windowless core — area that must be gutted, seismically braced and sprinklered but can never be rented as an apartment. Across 4 residential floors that is 39,921 sq ft of cost carrying no revenue.
Modeled conversion metrics for 333 W Julian St, 2026-10-20.
| Suitability scoreWorth a feasibility study | 56 / 100 |
|---|---|
| Storiesfrom OpenStreetMap, “Santa Clara County Social Services Agency, way 38919109”, in place of the count in the city's property records | 5 |
| Floor plateper floor, from the city footprint | 32,011 sq ft |
| Daylight efficiencyshare within 35 ft of a facade | 69% |
| Deepest interior pointviability threshold is 80 ft | 66 ft |
| Windowless coreper floor — renovated but never rentable | 9,980 sq ft |
| Estimated homesat 750 sq ft average | 93 |
| Conversion cost$405/sq ft all-in on 128,044 sq ft | $51.9M |
| Gap before grantshortfall against completed value | $12.3M |
| Modeled RESIDE grantbelow the statutory cap | $5.6M |
| Gap after grant, 60% ruledoes not pencil with most homes at 60% AMI rents | $12.0M |
| BuiltSan Jose does not publish a construction year with this data | — |
| ZoningDowntown San Jose | CIC |
| Unsafe-building recordSan Jose publishes no code enforcement cases | Not published |
| Opportunity Zone, 2018 mapcensus tract 06085500800, 2018 designation; counts through December 31, 2028 | Yes |
| Opportunity Zone, 2027 mapnot in a 2027 designated tract | No |
The plan: window line, shape and floor rhythm
34 ft of exterior wall for each home the screen estimates — enough for two- and three-bedroom homes across the plan.
The typical floor has 795 ft of exterior wall, and across 4 residential floors the building carries 3,179 ft of it in total, divided among the 93 homes this screen estimates.
Its plate is moderately compact at 0.64: a squarish plan, with enough perimeter for a conventional double-loaded corridor. How window line and plate shape are measured.
At the model’s 750 sq ft average, the plan works out at about 23.3 homes per floor, repeated on every residential floor, since this building's outline does not change as it rises.
Why 333 W Julian St scores 56 out of 100
Daylight efficiency 58, Interior depth 35, Scale 62, Finance 78 — each out of 100, then weighted.
Score components for 333 W Julian St. Points are the subscore times its weight.
| Component | Subscore | Weight | Points |
|---|---|---|---|
| Daylight efficiency69% of the floor area within 35 ft of a facade, scored from 40% up to 90% | 58 | 45% | 25.9 |
| Interior depthdeepest interior point 66 ft from a facade, scored from 80 ft down to 40 ft | 35 | 25% | 8.9 |
| Scale93 estimated homes, scored from 0 up to 150 | 62 | 15% | 9.3 |
| Financeremaining gap is 13% of conversion cost, scored from 60% down to 0% | 78 | 15% | 11.7 |
Most of what it earns comes from daylight efficiency, and what holds it back most is interior depth, at 35 out of 100: deepest interior point 66 ft from a facade, scored from 80 ft down to 40 ft.
What the conversion would cost
$405 per square foot all-in across 128,044 sq ft of converted floor, or $51.9M in total — about $558K for each of the 93 homes.
All-in cost per square foot for 333 W Julian St: base cost plus the code work a change of use triggers.
| Base conversion cost | $260/sq ft |
|---|---|
| Seismic retrofit (change of use) | $45/sq ft |
| Plumbing risers to every unit | $40/sq ft |
| Operable windows and glazing | $30/sq ft |
| Additional egress stair | $18/sq ft |
| Fire sprinklers (NFPA 13R) | $12/sq ft |
| All-in | $405/sq ft |
That cost is charged across every converted square foot, including the 39,921 sq ft of windowless core, which has to be gutted, seismically braced and sprinklered like the rest of the building and then earns nothing. Against it the model sets a completed value of $425K a home, which for 93 homes is $39.5M.
What would have to be true
A $12.3M gap before any grant, $6.8M after the modeled one. The smallest single change that would close it: average unit size 12% down.
The shortfall before any grant is $12.3M. Closing it from the value side means each of the 93 homes finishing at $558K rather than the $425K the model assumes — 31% more. Closing it from the cost side means getting all-in cost down from $405 to $309 per square foot.
A modeled RESIDE grant of $5.6M moves that threshold to $498K a home. That is still above the $425K assumed, leaving $6.8M uncovered, which is why the grant does not unlock this one. Under the law’s affordability rule, with most homes at 60% AMI rents, the homes are worth $34.3M instead of $39.5M, and $12.0M would remain after the grant.
Nor do all four levers have to move. For 333 W Julian St, one alone would close the gap at:
Single-assumption flip points for 333 W Julian St, each holding the other three at their defaults.
| Average unit sizethe binding constraint — the least this building would need | 12% downto 659 sq ft |
|---|---|
| Circulation efficiency | 14% upto 91% |
| Completed value per home | 17% upto $498K |
| Conversion cost per square foot | 20% downto $207/sq ft |
All four are sliders in the survey, where 333 W Julian St re-scores against your own numbers.
How it compares in Downtown San Jose
333 W Julian St ranks 33rd of the 47 buildings screened here, against a median score of 77.
Its floor plate is better lit than 28% of them, and shallower than 36% of them at its deepest interior point. On size it is the 36th largest by estimated homes. The full survey of all 47 buildings ranks and maps every one of them, and the list by address links each to its own page.
Its nearest match in size: 100 W San Fernando St
The screened building closest to 333 W Julian St in converted floor area is 100 W San Fernando St: 124,326 sq ft over 5 stories, against 128,044 sq ft over 5 here.
333 W Julian St scores 56 to its 73, and with the size held roughly equal most of that shortfall comes from interior depth: 35 out of 100 here, 68 there (deepest interior point 53 ft from a facade, scored from 80 ft down to 40 ft). On the money they sit in the same place: each falls short even with the modeled grant. The two stand about 2,800 ft apart.
Would it qualify for a RESIDE Act grant?
The model awards 333 W Julian St $5.6M, on the assumption it qualifies. Whether it does, no published dataset can say.
That figure assumes the building meets the Act’s vacant-and-abandoned test: an unsafe finding by code enforcement the owner has not fixed in 90 days, or receivership, nuisance abatement or abandonment under state law. San Jose publishes no code enforcement cases, so the test cannot be checked here.
This building sits in census tract 06085500800, a 2018 designated Opportunity Zone, which Section 201 lets HUD favor through December 31, 2028. It is not in a zone on the 2027 map, so that priority would not carry past 2028. Two maps apply because, under IRS Notice 2026-40, the 2018 zones stay in effect through 2028 while the new 2027 zones begin January 1, 2027. How the two maps overlap.
Other buildings screened near 333 W Julian St
The 4 closest the screen also covers, from 280 ft away. They are the colored outlines on the plan at the top of this page.
- 353 W Julian St9 stories · 65% daylit · 204 estimated homes · scores 53/100 (Worth a feasibility study)about 280 ft away
- 373 W Julian St7 stories · 69% daylit · 142 estimated homes · scores 62/100 (Worth a feasibility study)about 460 ft away
- 255 W Julian St6 stories · 92% daylit · 57 estimated homes · scores 89/100 (Strong candidate)about 920 ft away
- 201 Bassett St6 stories · 78% daylit · already an apartment buildingabout 1,100 ft away
A screen, not a feasibility study, from outlines and heights rather than plans: the method and how to correct a figure. If you know this building’s interior, you know what this model cannot see.