100 E San Fernando St

100 E San Fernando St is a 6-story condominium building in Downtown San Jose. Its floor plate has 39% of its area within daylight reach of a facade and scores 17 out of 100 on this screen’s measures, which is part of why it works as housing.

CA-18 · Screened 2026-09-12 · Already housing

Also addressed as 110 E San Fernando St, 130 E San Fernando St, 132 E San Fernando St and 140 E San Fernando St: San Jose’s address records place all 5 on this one footprint.

Where 100 E San Fernando St is

Its block in Downtown San Jose, drawn from San Jose's own building outlines and street centerlines.

111 Paseo De San Antonio: scores 96 out of 100101 Paseo De San Antonio: scores 52 out of 10088 E San Fernando St: scores 35 out of 100101 E San Fernando St: already housing9635S 4th StCentral PlS 3rd StE San Fernando StN100 ftDowntown San Jose
Suitability score
0–29
30–49
50–69
70–100
  • Already housing
  • Not screened
  • 100 E San Fernando St
100 E San Fernando St and the 1,000 ft of Downtown San Jose around it. The streets are drawn at the width of the right-of-way they run down, sidewalks included, and named, and every building on these blocks is drawn. What is left open and stippled is neither: a surface lot, a plaza or a vacant parcel. The screened buildings are colored by the ramp above, the same one the district map uses, carry their score, and each is a link to its own page. Each casts a shadow as long as its measured height lets it, so towers stand out from the low buildings around them; the unscreened buildings have no measured height and cast none. 100 E San Fernando St is outlined in its own score color at the outline it covers at ground level. Its windowless core is hatched. The inset places it among every building the screen covers.
137 ftAA200 ftDaylit 39%Core 69,343 sq ft
Floor plan: 39% of each floor sits within daylight reach of a facade. The shading is daylight, darkest at the windows and gone 35 ft in. The hatched area is windowless core: 69,343 sq ft per floor that must be renovated but can never be rented as an apartment. The dimension marks the deepest interior point, 137 ft from the nearest window. A–A is where the section beside it is cut.
Windowless core6 floors200 ft
Section A–A: cut across the depth of the plate, through the middle of the core. Daylight reaches 35 ft in from every facade, fading as it goes, and the hatched stripe left between the lit edges is floor that gets converted and can never be rented: 69,343 sq ft on the floor the screen scores, and 346,713 sq ft over 5 residential floors. The shaded ground floor is converted like the rest and counted as no homes.

This is already a condominium building: San Jose's rental housing and condominium records list 182 condominiums here. It is on the map because downtown zoning permits offices and homes alike, but this site does not count it as a conversion candidate.

Every floor carries 69,343 sq ft of windowless core — area that must be gutted, seismically braced and sprinklered but can never be rented as an apartment. Across 5 residential floors that is 346,713 sq ft of cost carrying no revenue.

Read with caution. This footprint carries 14 street addresses across 113,334 sq ft, which usually means the city’s GIS has merged a block or complex into a single polygon rather than describing one convertible building.

Modeled conversion metrics for 100 E San Fernando St, 2026-09-12.

Suitability scoreUnlikely17 / 100
Storiesfrom 77 ft LiDAR height ÷ 12 ft floor-to-floor6
Floor plateper floor, from the city footprint113,334 sq ft
Daylight efficiencyshare within 35 ft of a facade39%
Deepest interior pointviability threshold is 80 ft137 ft
Windowless coreper floor — renovated but never rentable69,343 sq ft
BuiltSan Jose does not publish a construction year with this data—
ZoningDowntown San JoseA(PD)
Opportunity Zonecensus tract 06085500901, 2018 designationYes

The plan: window line, shape and floor rhythm

31 ft of exterior wall for each home the screen estimates — enough for two- and three-bedroom homes across the plan.

The typical floor has 1,431 ft of exterior wall, and across 5 residential floors the building carries 7,156 ft of it in total, divided among the 234 homes this screen estimates.

Its plate is moderately compact at 0.70: a squarish plan, with enough perimeter for a conventional double-loaded corridor. How window line and plate shape are measured.

At the model’s 750 sq ft average, the plan works out at about 46.8 homes per floor, repeated on every residential floor, since this building's outline does not change as it rises.

Why 100 E San Fernando St scores 17 out of 100

Daylight efficiency 0, Interior depth 0, Scale 100, Finance 13 — each out of 100, then weighted.

Score components for 100 E San Fernando St. Points are the subscore times its weight.

ComponentSubscoreWeightPoints
Daylight efficiency39% of the floor area within 35 ft of a facade, scored from 40% up to 90%045%0.0
Interior depthdeepest interior point 137 ft from a facade, scored from 80 ft down to 40 ft025%0.0
Scale234 estimated homes, scored from 0 up to 15010015%15.0
Financeremaining gap is 52% of conversion cost, scored from 60% down to 0%1315%1.9

Most of what it earns comes from scale, and what holds it back most is daylight efficiency, at 0 out of 100: 39% of the floor area within 35 ft of a facade, scored from 40% up to 90%.

Other buildings screened near 100 E San Fernando St

The 4 closest the screen also covers, from 370 ft away. They are the colored outlines on the plan at the top of this page.

  • 88 E San Fernando St
    24 stories · 58% daylit · 681 estimated homes · scores 35/100 (Marginal)
    about 370 ft away
  • 111 Paseo De San Antonio
    6 stories · 94% daylit · 275 estimated homes · scores 96/100 (Strong candidate)
    about 380 ft away
  • 101 Paseo De San Antonio
    7 stories · 69% daylit · 128 estimated homes · scores 52/100 (Worth a feasibility study)
    about 450 ft away
  • 101 E San Fernando St
    6 stories · 39% daylit · already an apartment building
    about 540 ft away

A screen, not a feasibility study, from outlines and heights rather than plans: the method and how to correct a figure. If you know this building’s interior, you know what this model cannot see.