10 Almaden Blvd

10 Almaden Blvd is a 18-story building in Downtown San Jose with 47% of its floor area within daylight reach of a facade. This screen estimates 576 homes and scores it 25 out of 100 for office-to-residential conversion suitability.

CA-18 · Screened 2026-09-12 · Unlikely

Build a conversion planCheck its numbers, lay out its homes and get a two-page PDF. Free.

Where 10 Almaden Blvd is

Its block in Downtown San Jose, drawn from San Jose's own building outlines and street centerlines.

1 Almaden Blvd: scores 100 out of 10055 Almaden Blvd: scores 99 out of 100350 W Santa Clara St: scores 96 out of 100233 W Santa Clara St: scores 81 out of 10095 S Almaden Ave: scores 66 out of 10051 S Market St: scores 52 out of 100333 W Santa Clara St: scores 35 out of 100127 Post St: scores 35 out of 10038 N Almaden Blvd: scores 35 out of 100160 W Santa Clara St: scores 35 out of 100225 W Santa Clara St: scores 29 out of 1001008135352925Post StS Almaden AveW Santa Clara StAlmaden BlvdNotre Dame AveN100 ftDowntown San Jose
Suitability score
0–29
30–49
50–69
70–100
  • Already housing
  • Not screened
  • 10 Almaden Blvd
10 Almaden Blvd and the 1,000 ft of Downtown San Jose around it. The streets are drawn at the width of the right-of-way they run down, sidewalks included, and named, and every building on these blocks is drawn. What is left open and stippled is neither: a surface lot, a plaza or a vacant parcel. The screened buildings are colored by the ramp above, the same one the district map uses, carry their score, and each is a link to its own page. Each casts a shadow as long as its measured height lets it, so towers stand out from the low buildings around them; the unscreened buildings have no measured height and cast none. 10 Almaden Blvd is outlined in its own score color at the outline it covers at ground level. Its windowless core is hatched. The inset places it among every building the screen covers.
120 ftAA100 ftDaylit 47%Core 35,895 sq ft
Floor plan: 47% of each floor sits within daylight reach of a facade. The shading is daylight, darkest at the windows and gone 35 ft in. The hatched area is windowless core: 35,895 sq ft per floor that must be renovated but can never be rented as an apartment. The dimension marks the deepest interior point, 120 ft from the nearest window. A–A is where the section beside it is cut.
Windowless coreDaylit18 floors100 ft
Section A–A: cut across the depth of the plate, through the middle of the core. Daylight reaches 35 ft in from every facade, fading as it goes, and the hatched stripe left between the lit edges is floor that gets converted and can never be rented: 35,895 sq ft on the floor the screen scores, and 610,216 sq ft over 17 residential floors. The shaded ground floor is converted like the rest and counted as no homes.

This building does not pencil at default assumptions, even with a modeled RESIDE Act grant.

Every floor carries 35,895 sq ft of windowless core — area that must be gutted, seismically braced and sprinklered but can never be rented as an apartment. Across 17 residential floors that is 610,216 sq ft of cost carrying no revenue.

Modeled conversion metrics for 10 Almaden Blvd, 2026-09-12.

Suitability scoreUnlikely25 / 100
Storiesfrom 217 ft LiDAR height ÷ 12 ft floor-to-floor18
Floor plateper floor, from the city footprint67,662 sq ft
Daylight efficiencyshare within 35 ft of a facade47%
Deepest interior pointviability threshold is 80 ft120 ft
Windowless coreper floor — renovated but never rentable35,895 sq ft
Estimated homesat 750 sq ft average576
Conversion cost$405/sq ft all-in on 1,150,248 sq ft$465.9M
Gap before grantshortfall against completed value$221.1M
Modeled RESIDE grantat the statutory per-award cap$10.0M
BuiltSan Jose does not publish a construction year with this data—
ZoningDowntown San JoseDC
Opportunity Zonecensus tract 06085500800, 2018 designationYes

The plan: window line, shape and floor rhythm

32 ft of exterior wall for each home the screen estimates — enough for two- and three-bedroom homes across the plan.

The typical floor has 1,083 ft of exterior wall, and across 17 residential floors the building carries 18,411 ft of it in total, divided among the 576 homes this screen estimates.

Its plate is compact at 0.72: close to a square or a circle, the most efficient envelope an office can have and the least generous one for apartments: little perimeter to divide among homes. How window line and plate shape are measured.

At the model’s 750 sq ft average, the plan works out at about 33.9 homes per floor, repeated on every residential floor, since this building's outline does not change as it rises.

Why 10 Almaden Blvd scores 25 out of 100

Daylight efficiency 14, Interior depth 0, Scale 100, Finance 24 — each out of 100, then weighted.

Score components for 10 Almaden Blvd. Points are the subscore times its weight.

ComponentSubscoreWeightPoints
Daylight efficiency47% of the floor area within 35 ft of a facade, scored from 40% up to 90%1445%6.3
Interior depthdeepest interior point 120 ft from a facade, scored from 80 ft down to 40 ft025%0.0
Scale576 estimated homes, scored from 0 up to 15010015%15.0
Financeremaining gap is 45% of conversion cost, scored from 60% down to 0%2415%3.7

Most of what it earns comes from scale, and what holds it back most is interior depth, at 0 out of 100: deepest interior point 120 ft from a facade, scored from 80 ft down to 40 ft.

What the conversion would cost

$405 per square foot all-in across 1,150,248 sq ft of converted floor, or $465.9M in total — about $809K for each of the 576 homes.

All-in cost per square foot for 10 Almaden Blvd: base cost plus the code work a change of use triggers.

Base conversion cost$260/sq ft
Seismic retrofit (change of use)$45/sq ft
Plumbing risers to every unit$40/sq ft
Operable windows and glazing$30/sq ft
Additional egress stair$18/sq ft
Fire sprinklers (NFPA 13R)$12/sq ft
All-in$405/sq ft

That cost is charged across every converted square foot, including the 610,216 sq ft of windowless core, which has to be gutted, seismically braced and sprinklered like the rest of the building and then earns nothing. Against it the model sets a completed value of $425K a home, which for 576 homes is $244.8M.

What would have to be true

A $221.1M gap before any grant, $211.1M after the modeled one. The smallest single change that would close it: average unit size 46% down.

The shortfall before any grant is $221.1M. Closing it from the value side means each of the 576 homes finishing at $809K rather than the $425K the model assumes — 90% more. Closing it from the cost side means getting all-in cost down from $405 to $213 per square foot.

A modeled RESIDE grant of $10.0M moves that threshold to $791K a home. That is still above the $425K assumed, leaving $211.1M uncovered, which is why the grant does not unlock this one.

Nor do all four levers have to move. For 10 Almaden Blvd, one alone would close the gap at:

Single-assumption flip points for 10 Almaden Blvd, each holding the other three at their defaults.

Average unit sizethe binding constraint — the least this building would need46% downto 403 sq ft
Conversion cost per square foot71% downto $77/sq ft
Completed value per home86% upto $791K

All four are sliders in the survey, where 10 Almaden Blvd re-scores against your own numbers.

How it compares in Downtown San Jose

10 Almaden Blvd ranks 77th of the 82 buildings screened here, against a median score of 64.

Its floor plate is better lit than 7% of them, and shallower than 6% of them at its deepest interior point. On size it is the 14th largest by estimated homes. The full survey of all 82 buildings ranks and maps every one of them, and the list by address links each to its own page.

Within the DC zone

67th of 72 zoned DC — the comparison that shares its rules, rents and streets.

72 of the screened buildings are zoned DC. 10 Almaden Blvd ranks 67th of them against a median score of 61. 31 score 70 or more, their median deepest interior point is 68 ft from a facade against this building’s 120 ft, and together they would hold an estimated 23,276 homes. The group’s top scorer is 1 Almaden Blvd, at 100.

Its nearest match in size: 225 W Santa Clara St

The screened building closest to 10 Almaden Blvd in converted floor area is 225 W Santa Clara St: 1,159,307 sq ft over 18 stories, against 1,150,248 sq ft over 18 here.

10 Almaden Blvd scores 25 to its 29, and with the size held roughly equal most of that shortfall comes from daylight efficiency: 14 out of 100 here, 21 there (51% of the floor area within 35 ft of a facade, scored from 40% up to 90%). On the money they sit in the same place: each falls short even with the modeled grant. The two stand about 400 ft apart.

Would it qualify for a RESIDE Act grant?

The model awards 10 Almaden Blvd $10.0M, on the assumption it qualifies. Whether it does, no published dataset can say.

That figure assumes the building meets the Act’s vacant-and-abandoned test, which turns on code-enforcement and receivership records no city publishes.

This building does sit in census tract 06085500800, a 2018 designated Opportunity Zone, which Section 201 lets HUD favor — one of the few statutory priorities this screen can actually check.

Other buildings screened near 10 Almaden Blvd

The 4 closest the screen also covers, from 370 ft away. They are the colored outlines on the plan at the top of this page.

  • 233 W Santa Clara St
    10 stories · 84% daylit · 126 estimated homes · scores 81/100 (Strong candidate)
    about 370 ft away
  • 160 W Santa Clara St
    16 stories · 62% daylit · 341 estimated homes · scores 35/100 (Marginal)
    about 380 ft away
  • 1 Almaden Blvd
    15 stories · 94% daylit · 190 estimated homes · scores 100/100 (Strong candidate)
    about 410 ft away
  • 225 W Santa Clara St
    18 stories · 51% daylit · 625 estimated homes · scores 29/100 (Unlikely)
    about 440 ft away

A screen, not a feasibility study, from outlines and heights rather than plans: the method and how to correct a figure. If you know this building’s interior, you know what this model cannot see.