1635 17th St

1635 17th St is a 7-story building in Greater Downtown Denver with 82% of its floor area within daylight reach of a facade. This screen estimates 158 homes and scores it 70 out of 100 for office-to-residential conversion suitability.

CO-1 · Screened 2026-09-19 · Worth a feasibility study

Build a conversion planCheck its numbers, lay out its homes and get a two-page PDF. Free.

Also addressed as 1634 18th St, 1668 18th St, 1700 Wynkoop St, 1708 Wynkoop St, 1710 Wynkoop St, 1720 Wynkoop St, 1730 Wynkoop St, 1736 Wynkoop St, 1738 Wynkoop St and 1792 Wynkoop St: Denver’s address records place all 11 on this one footprint.

Where 1635 17th St is

Its block in Greater Downtown Denver, drawn from Denver's own building outlines and street centerlines.

1600 17th St: scores 95 out of 1001525 17th St: scores 77 out of 1001745 Wazee St: scores 68 out of 1001600 Wynkoop St: scores 65 out of 1001863 Wazee St: already housing1801 Wynkoop St: already housing1621 18th St: scores 60 out of 1001755 Blake St: scores 58 out of 1001801 Blake St: scores 56 out of 1001751 16th St: scores 50 out of 1001705 17th St: scores 47 out of 1009577686058564770WYNKOOP STWAZEE ST18TH ST17TH STN100 ftGreater Downtown Denver
Suitability score
0–29
30–49
50–69
70–100
  • Already housing
  • Not screened
  • 1635 17th St
1635 17th St and the 1,000 ft of Greater Downtown Denver around it. The streets are drawn at the width of the right-of-way they run down, sidewalks included, and named, and every building on these blocks is drawn. What is left open and stippled is neither: a surface lot, a plaza or a vacant parcel. The screened buildings are colored by the ramp above, the same one the district map uses, carry their score, and each is a link to its own page. Each casts a shadow as long as its measured height lets it, so towers stand out from the low buildings around them; the unscreened buildings have no measured height and cast none. 1635 17th St is outlined in its own score color at the outline it covers at ground level. Dashed inside it is the typical floor, the one the floor-plate figure below draws, because this building steps back as it rises. Its windowless core is hatched. The inset places it among every building the screen covers.
66 ftAA100 ftDaylit 76%Core 11,941 sq ft
Typical floor plan: 82% of the building’s floor area sits within daylight reach of a facade; the drawing shows its typical floor, where the share is 76%. The shading is daylight, darkest at the windows and gone 35 ft in. The hatched area is windowless core: 11,941 sq ft per typical floor that must be renovated but can never be rented as an apartment. The dimension marks the deepest interior point, 66 ft from the nearest window. A–A is where the section beside it is cut.
No homesDaylit7 floors50 ft
Section A–A: cut across the depth of the plate, through the middle of the core. Daylight reaches 35 ft in from every facade, fading as it goes, and the hatched stripe left between the lit edges is floor that gets converted and can never be rented: 11,941 sq ft on the floor the screen scores, and 32,624 sq ft over 6 residential floors. The steps are where the building sets back as it rises. The shaded ground floor is converted like the rest and counted as no homes.

This building does not pencil at default assumptions, even with a modeled RESIDE Act grant.

Across its 6 residential floors this building carries 32,624 sq ft of windowless core — area that must be gutted, re-plumbed and sprinklered but can never be rented as an apartment.

Part of this building is already homes. Denver's property records list 43 condominiums here, alongside 4 non-residential records. The figures here treat the whole building as convertible, so read them as an upper bound and check which floors are already housing.

Read with caution. This footprint carries 11 street addresses across 49,300 sq ft, which usually means the city’s GIS has merged a block or complex into a single polygon rather than describing one convertible building.

Modeled conversion metrics for 1635 17th St, 2026-09-19.

Suitability scoreWorth a feasibility study70 / 100
Storiesfrom 84 ft aerial-survey height ÷ 12 ft floor-to-floor7
Height bandsfloor plate by floor range, from the city's roof outlinesFloors 1–2: 49,300 sq ft · Floor 3: 45,503 sq ft · Floor 4: 40,539 sq ft · Floor 5: 32,040 sq ft · Floor 6: 12,633 sq ft · Floor 7: 888 sq ft
Floor platetypical floor, from the city outlines49,300 sq ft
Daylight efficiencyshare within 35 ft of a facade82%
Deepest interior pointviability threshold is 80 ft66 ft
Windowless coretypical floor; the building-wide total is in the text above11,941 sq ft
Estimated homesat 750 sq ft average158
Conversion cost$360/sq ft all-in on 180,904 sq ft$65.1M
Gap before grantshortfall against completed value$27.8M
Modeled RESIDE grantbelow the statutory cap$9.5M
BuiltDenver does not publish a construction year with this data—
ZoningUnion StationD-LD
Opportunity Zonenot in a 2018 designated tractNo

The plan: window line, shape and floor rhythm

36 ft of exterior wall for each home the screen estimates — enough for two- and three-bedroom homes across the plan.

The typical floor has 1,283 ft of exterior wall, and across 6 residential floors the building carries 5,614 ft of it in total, divided among the 158 homes this screen estimates.

Its plate is elongated at 0.38: a slab or an L, which is why so much of the floor lies within reach of a window: the outline buys daylight that a square plan of the same area would not. How window line and plate shape are measured.

At the model’s 750 sq ft average, the plan works out at about 26.3 homes per floor, repeated on every residential floor, since this building's outline does not change as it rises.

Why 1635 17th St scores 70 out of 100

Daylight efficiency 84, Interior depth 36, Scale 100, Finance 53 — each out of 100, then weighted.

Score components for 1635 17th St. Points are the subscore times its weight.

ComponentSubscoreWeightPoints
Daylight efficiency82% of the floor area within 35 ft of a facade, scored from 40% up to 90%8445%37.8
Interior depthdeepest interior point 66 ft from a facade, scored from 80 ft down to 40 ft3625%8.9
Scale158 estimated homes, scored from 0 up to 15010015%15.0
Financeremaining gap is 28% of conversion cost, scored from 60% down to 0%5315%8.0

Most of what it earns comes from daylight efficiency, and what holds it back most is interior depth, at 36 out of 100: deepest interior point 66 ft from a facade, scored from 80 ft down to 40 ft.

What the conversion would cost

$360 per square foot all-in across 180,904 sq ft of converted floor, or $65.1M in total — about $412K for each of the 158 homes.

All-in cost per square foot for 1635 17th St: base cost plus the code work a change of use triggers.

Base conversion cost$260/sq ft
Plumbing risers to every unit$40/sq ft
Operable windows and glazing$30/sq ft
Additional egress stair$18/sq ft
Fire sprinklers (NFPA 13R)$12/sq ft
All-in$360/sq ft

That cost is charged across every converted square foot, including the 32,624 sq ft of windowless core, which has to be gutted, re-plumbed and sprinklered like the rest of the building and then earns nothing. Against it the model sets a completed value of $236K a home, which for 158 homes is $37.3M.

What would have to be true

A $27.8M gap before any grant, $18.4M after the modeled one. The smallest single change that would close it: average unit size 32% down.

The shortfall before any grant is $27.8M. Closing it from the value side means each of the 158 homes finishing at $412K rather than the $236K the model assumes — 75% more. Closing it from the cost side means getting all-in cost down from $360 to $206 per square foot.

A modeled RESIDE grant of $9.5M moves that threshold to $352K a home. That is still above the $236K assumed, leaving $18.4M uncovered, which is why the grant does not unlock this one.

Nor do all four levers have to move. For 1635 17th St, one alone would close the gap at:

Single-assumption flip points for 1635 17th St, each holding the other three at their defaults.

Average unit sizethe binding constraint — the least this building would need32% downto 507 sq ft
Conversion cost per square foot39% downto $159/sq ft
Completed value per home49% upto $352K

All four are sliders in the survey, where 1635 17th St re-scores against your own numbers.

How it compares in Greater Downtown Denver

1635 17th St ranks 116th of the 214 buildings screened here, against a median score of 72.

Its floor plate is better lit than 48% of them, and shallower than 14% of them at its deepest interior point. On size it is the 127th largest by estimated homes. The full survey of all 214 buildings ranks and maps every one of them, and the list by address links each to its own page.

Within Union Station and the D-LD zone

24th of 55 in Union Station, 11th of 29 zoned D-LD — the comparison that shares its rules, rents and streets.

Denver places 55 of the screened buildings in Union Station. 1635 17th St ranks 24th of them against a median score of 69. 23 score 70 or more, their median deepest interior point is 61 ft from a facade against this building’s 66 ft, and together they would hold an estimated 13,167 homes. The group’s top scorer is 1600 17th St, at 95.

29 of the screened buildings are zoned D-LD. 1635 17th St ranks 11th of them against a median score of 68. 10 score 70 or more, their median deepest interior point is 61 ft from a facade against this building’s 66 ft, and together they would hold an estimated 5,069 homes. The group’s top scorer is 1600 17th St, at 95.

Its nearest match in size: 1600 17th St

The screened building closest to 1635 17th St in converted floor area is 1600 17th St: 183,452 sq ft over 7 stories, against 180,904 sq ft over 7 here.

1635 17th St scores 70 to its 95, and with the size held roughly equal most of that shortfall comes from interior depth: 36 out of 100 here, 100 there (deepest interior point 37 ft from a facade, scored from 80 ft down to 40 ft). On the money they sit in the same place: each falls short even with the modeled grant. The two stand about 400 ft apart.

Would it qualify for a RESIDE Act grant?

The model awards 1635 17th St $9.5M, on the assumption it qualifies. Whether it does, no published dataset can say.

That figure assumes the building meets the Act’s vacant-and-abandoned test, which turns on code-enforcement and receivership records no city publishes.

It does not sit in a 2018 designated Opportunity Zone, so it would not draw that Section 201 priority.

Other buildings screened near 1635 17th St

The 4 closest the screen also covers, from 180 ft away. They are the colored outlines on the plan at the top of this page.

  • 1745 Wazee St
    7 stories · 81% daylit · 79 estimated homes · scores 68/100 (Worth a feasibility study)
    about 180 ft away
  • 1705 17th St
    7 stories · 70% daylit · 97 estimated homes · scores 47/100 (Marginal)
    about 300 ft away
  • 1525 17th St
    8 stories · 88% daylit · 114 estimated homes · scores 77/100 (Strong candidate)
    about 350 ft away
  • 1621 18th St
    6 stories · 73% daylit · 88 estimated homes · scores 60/100 (Worth a feasibility study)
    about 410 ft away

A screen, not a feasibility study, from outlines and heights rather than plans: the method and how to correct a figure. If you know this building’s interior, you know what this model cannot see.